收藏本站
Chapter 4 – Leased Line Operation
Chapter 4 - Leased Line Operation
This chapter describes how to use the MultiModem II modem on a leased line.
A leased line is a private, permanent, telephone connection between two points. Unlike normal dialup
connections, a leased line is always active. The modems automatically connect when they are attached
to the line and are turned on. Because a leased line is always active, one of the two modems on the line
must be configured as the originate modem and the other as the answer modem; it does not matter which
is which.
In the event of an interruption, leased line modems automatically reconnect when the data line or power
is restored. The modem also supports dial backup, which enables the modem to automatically switch to a
dial-up connection if the leased line goes down.
The modem supports both two-wire and four-wire leased-line operation.
Two-Wire / Four-Wire Setup
1. For leased line operation, plug one end of a two-wire phone cable into the modem’s LEASED
jack. Connect the other end to a leased line wall jack or terminals.
2. Turn on the modem.
3. Starting at the STATUS LCD, press the following buttons on the front panel:
,
,
,
,
,
. The CURRENT SETTING= LCD appears.
4. If the CURRENT SETTING= LCD shows ASYNC AT , press
and go to step 7. If it shows
anything else, press
to go to the ASYNC, NORM? LCD.
5. Press the Enter button to select normal asynchronous operation.
6. The OPTION SET LCD appears. Press
to exit to the SYNC/ASYNC OPTIONS LCD.
7. Press
,
,
,
,
,
,
. The 2 WIRE LEASE? ORIG LCD appears.
8. Choose one of two actions:
?
To set up the modem as the originate modem, press the Enter button.
?
To set up the modem as the answer modem, press
to display the 2 WIRE
LEASE? ANSWER LCD, and then press the Enter button.
Note: One of the modems in a leased line pair must be configured as the originate
modem, and the other as the answer modem, but it does not matter which is which.
9. The OPTION SET LCD appears. Press
to exit to the ONLINE OPTIONS LCD, or
to
exit to the CURRENT SETTING= LCD to verify the selection.
10. This completes the setup for two-wire leased line operation. Upon completion, the modem
attempts to connect to the modem at the other end of the leased line. If the remote modem
has not yet been configured for leased line operation, you may turn off the local modem until
the remote one is ready.
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
29
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MT5634IND-EU MODEM V.92 DATA/FAX EU BUNDLE
MT5634ZBA-DID MODEM V.34 SUPER G3 DID FAX
MT5634ZBA-GLOBAL MODEM V.90 DATA/FAX GLOBAL
MT5634ZBA-V92-NPS MODEM V.92 DATA/FAX WORLD
MT5634ZPX-PCI-U-NV MODEM V.92 WORLD DATA/FAX
MT5634ZPX-PCI-U MODEM V.92 VOICE/DATA/FAX PCI
MT5656ZDX-V MODEM V.92 VOICE/DATA/FAX
MT5656ZDX MODEM V.92 DATA/FAX
相关代理商/技术参数
MT5600BA-V92-NAM-W1 制造商:Black Box Corporation 功能描述:1 YEAR WARRANTY FOR MT5600BA-V92-NAM
MT5600BA-V92-NAM-W3 制造商:Black Box Corporation 功能描述:3 YEAR WARRANTY FOR MT5600BA-V92-NAM
MT5600BA-V92-NPS 功能描述:MODEM V.92 DATA/FAX WORLD RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® II 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5600BA-V92-NPS-W1 制造商:Black Box Corporation 功能描述:1 YEAR WARRANTY FOR MT5600BA-V92-NPS
MT5600BA-V92-NPS-W3 制造商:Black Box Corporation 功能描述:3 YEAR WARRANTY FOR MT5600BA-V92-NPS
MT5600BA-V92-NZ 制造商:Multi-Tech Systems 功能描述:V.92 DATA/FAX WORLD MODEM (DIAL-UP/LEASED) - Bulk
MT5600BR-V92 功能描述:MODEM V.92 56K RACK RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:CC1600 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5600BR-V92-W1 制造商:Black Box Corporation 功能描述:1 YEAR WARRANTY FOR MT5600BR-V92